Bought a set of Depo LED Taillights for your 03-05 SRT-4 ? Well, this is a easy product to install, but due to the product not coming with installation instructions, some customers can be confused on how to install them. Many of our customers cant understand how these taillights will plug in like a bulb, and are expecting to find some sort of special electrical plug to connect to.
So, we’ve taken some photos, and have written up a installation instruction set on how to install these on your 03-05 Dodge SRT-4.
Heres the Depo Led Taillight in black on top, and the factory taillight on the bottom.
Heres a shot of the backside of the taillight. In this guide we arent going to cover how to remove the nuts that hold the taillight to the car. We’re going to cover
the part most customers of ours get in trouble with: installing the wiring for the taillights. In order to access the taillight, you’ll need to remove the carpet that covers the taillight.
After locating the taillight, the next step is to remove the brake light/turn signal bulb and wiring, as well as the backup bulb. You remove both of these
from the taillight by turning the sockets counter clockwise. The large bulb is for the brake light/turn signal, and the smaller bulb is for the backup light.
Next, remove the brake light/turn signal bulb from the socket. This is what the socket will look like after removing the bulb.
This is the wiring from the taillight, and the bulb that we removed earlier from the socket. Notice how they are identical. The taillight wiring plugs into the factory wiring socket like a bulb normally would.
Now, plug the taillight wiring directly in ! Also, dont forget to screw the backup light into the taillight clockwise!
Presto! Your done ! Its that simple !