in

MP now offers BC Coilovers for 1995-1999 Dodge/Plymouths with SRT4 swaps!

BC Coilovers for 1995-1999 Neon with SRT4 swap

If you have a 1995-1999 Neon and are planning on doing a SRT4 swap in the near future, this will help with your swap immensly. Not doing a SRT4 swap in your vehicle? Then these will do you no good, take a look at our other listing for standard BC coilovers for 1995-1999 Neon

We take the standard 1995-1999 Neon BC Coilover, and we then get an extra set of the threaded sleeves to allow you to use the Neon SRT4 hubs. By giving you both sets of sleeves, both 95-99 Neon and the 03-05 SRT4 sleeves, you can install the coilovers now, drive around on them for a while and then later swap the sleeves over to the SRT4 ones when its time for the swap.

These coilovers have a 30 way adjustment so you can adjust the dampening of the coilovers to your liking. 0 is full soft, 30 is full hard, and most people leave the dampening around 7-14.

Because of the threaded lower sleeve, you have a 0-3 inch drop capability that will NOT sacrifice your strut travel, and ride quality. You can lower your vehicle 2 inches, and not be hitting the bump stops constantly!

Lastly, the BC coilovers are triple coated for protection against water, dirt, oil and other debris.
BC Coilovers for 1995-1999 Neon with SRT4 swap
BC Coilovers for 1995-1999 Neon with SRT4 swap
BC Coilovers for 1995-1999 Neon with SRT4 swap
BC Coilovers for 1995-1999 Neon with SRT4 swap

Written by Modern Performance

We're the team at www.modernperformance.com!

MP now offering Mopar Lower Control Arms with Prothane control arm bushings installed for the 03-05 Dodge SRT4/00-10 PT Cruiser

Neon SRT4 – upgrade from stage 2 to stage 3 kit? Of course we can help!